In this course you’ll learn about the chemistry of Hydrogen Sulfide and how it is formed, the properties and characteristics of the gas, where Hydrogen Sulfide is likely to be located in your workplace, the potential health hazards of short term and long term H2S exposure, how to work safely with Hydrogen Sulfide and emergency response steps to take should you or a co-worker be exposed to this gas.
H2S Hydrogen Sulfide Awareness
- List and describe the properties of hydrogen sulfide
- Describe how hydrogen sulfide is created, where it occurs, and the industries in which it is used
- 3 Describe the methods used to detect, monitor and warn of hydrogen sulfide
- Describe the physical and health hazards of hydrogen sulfide
- Describe the appropriate responses to hydrogen sulfide exposures and emergencies
Hydrogen sulfide caused 60 worker deaths between 2001 and 2010.
Hydrogen sulfide is a chemical compound with the formula H2S. It is an extremely hazardous gas whose marker is the smell of rotten eggs. It is colorless and very dangerous when high concentrations are inhaled. Hydrogen sulfide is highly flammable and explodes easily near lit matches, cigarettes, and other sources of spark or heat.
So, where do you find hydrogen sulfide gas (H2S)? H2S presents a particular hazard to those working in confined spaces at or below ground level because it is a naturally occurring hazard. According to the Occupational Safety & Health Administration (OSHA), “Hydrogen sulfide also occurs naturally in sewers, manure pits, well water, oil and gas wells, and volcanoes. Because it is heavier than air, hydrogen sulfide can collect in low-lying and enclosed spaces, such as manholes, sewers, and underground telephone vaults. Its presence makes work in confined spaces potentially very dangerous.” Those most at risk for natural exposure are miners and other personnel involved in energy production, like the oil and gas sector; these industries are also commonly associated with the dangers of confined spaces.
Although only a little irritating at lower concentrations, hydrogen sulfide exposure can result in death. The most likely and dangerous exposure pathway is through inhalation of hydrogen sulfide gas, however, there are some instances where contact is made with the skin. Contact with the skin can result in frostbite or burns.
How do safety professionals mitigate the risk of hydrogen sulfide gas?
Engineering controls are the mechanical means to control the hazard at its source and are the preferred way to protect against hazards. Engineering controls are designed to eliminate the hazard completely, if possible. The primary engineering control used in eliminating hazardous gases is a ventilation system that removes the gas from the work space and makes the area safe for occupancy.
If a hazard cannot be eliminated using engineering controls, administrative controls are added to the hazard-control strategy. Administrative controls are a company’s rules and procedures put in place to protect the health and safety of the workforce.
If engineering and administrative controls are not possible or are not fully effective, you may be required to use personal protective equipment (PPE). For protection against hydrogen sulfide we would be talking about respiratory equipment, eye protection and special gloves and clothing if skin contact is possible. If skin contact is possible, gloves and clothing must be made from a material that cannot be permeated or degraded by hydrogen sulfide and that is insulated to prevent body tissue from freezing.
Hydrogen sulfide often affects the eyes. If someone’s eyes are red or irritated because of exposure to hydrogen sulfide, the first thing you should do is check to see if he or she is wearing contact lenses. If so, remove them at once. Rinse the eyes with plain water for at least 15 minutes, lifting the eyelids as you rinse. Then seek immediate medical attention.
If a worker is exposed to hydrogen sulfide through the skin, wash the skin immediately with water. Contaminated clothing and shoes will be flammable; to reduce the risk of static discharge and ignition, soak contaminated articles of clothing thoroughly while they are still being worn. Then, remove them immediately and wash the skin below thoroughly with water before seeking medical attention.
While you may encounter emergencies like the ones mentioned previously, hazardous exposure to hydrogen sulfide is almost always through inhalation.
Extreme inhalation exposure usually occurs when a worker is unaware of the danger and enters an area with toxic amounts of hydrogen sulfide that cause him or her to collapse. Breathing can be affected very quickly, so it is critical to remove the person to fresh air. When a co-worker has collapsed in an environment where hydrogen sulfide may be present, call 911 or other emergency medical responders. Remove the person to fresh air. If breathing has stopped AND you are trained, begin CPR using universal precautions. Transfer the person promptly to a medical facility.
Not all training is equal. With SafetyNow, learners and leaders will notice the difference in value:
- Quality: Professionally-researched and designed using the latest mobile and responsive technologies
- Convenience: Works instantly on any device, desktop or mobile
- Time savings: What learners need to know, not extra fluff or legalese
- Reporting: Consistent, instant compliance records available anytime
- Support: Customer and learner support included at no charge
- Any Learning Management System (LMS) Use with any SCORM, AICC, xAPI, TinCan, HTML5, or other LMS (learning management system).
- Any Device Desktop, laptop, tablet, or mobile phone – it simply works, everywhere.
- Engaging Professionally-developed, including an on-screen host and modern, easy-to-understand text, media, and voiceovers.
- Unlimited Attempts Each module can be taken as many times as required to get a passing grade. Unlike our competitor’s courses, if you get an answer wrong, you are redirected to the exact eLearning segment you struggled with… you don’t need to go through the entire module again, just the one part you need a refresher on.
Only logged in customers who have purchased this product may leave a review.